CDPFZ - KOPPERS FLASHING CEMENT

  • MSDS: CDPFZ
  • Manufacturer: KOP COAT INC
  • Product Name: KOPPERS FLASHING CEMENT
  • National Stock Number: 5610-00-236-4946
Product Identification

Product ID:KOPPERS FLASHING CEMENT
MSDS Date:04/16/1997
FSC:5610
NIIN:00-236-4946
MSDS Number: CDPFZ

Responsible Party
KOP-COAT INC
436 7TH AVENUE
PITTSBURGH, PA 15219-1818
US

Emergency Phone: 800-548-0489 OR 412-227-2700

Info Phone: 800-547-2468

Cage: 00297

Contractor
KOP-COAT INC
PITTSBURGH, PA 15219-1818 US

Telephone: 800-553-5631, CHEMTREC 800-424-9300

Cage: 00297

Ingredients

NO HAZARDOUS INGREDIENTS

OSHA PEL NOT RELEVANT

ACGIH TLV: NOT RELEVANT

Hazards

LD50 LC50 Mixture:SOLVENTS 200PPM,BENZENE SOLUBLES0.2MG/M3
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HEADACHE, DIZZINESS, NAUSEA.

First Aid

First Aid:EYE: FLUSH W/PLENTY OF WATER. SKIN: FLUSH W/PLENTY OF WATER.
INHAL: REMOVE TO FRESH AIR, CALL DR. IF NO BREATH, GIVE ARTIFICIAL
RESPIRATION. INGEST: DO NOT INDUCE VOMIT, CALL DR.

Fire Fighting

Flash Point Method:SCC
Flash Point:139F,59C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:IF EXCESSIVE FLAME/SMOKE ENCOUNTERED, WEAR
SCBA & FULL PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:CONTAINER MAY EXPLODE W/HEAT, USE WATER
TO COOL CONTAINER. WATER/FOAM MAY CAUSE FROTHING ON EXPOSED HOT
MATERIAL.

Accidental Release

Spill Release Procedures:COVER W/ABSORBENT, USE PROTECTIVE
EQUIPMENT/CLOTHING.

Handling

Handling and Storage Precautions:AVOID REPEATED SKIN CONTACT.
Other Precautions:DO NOT USE IN CONFINED AREAS W/O ADEQUATE
VENTILATION.

Exposure Controls

Respiratory Protection:NIOSH APPROVED ORGANIC VAPOR CANISTER.
Ventilation:LOCAL EXHAUST.
Protective Gloves:RUBBER.
Eye Protection:SAFETY GOGGLES/FACE SHIELD.
Other Protective Equipment:COVERALLS, RUBBER APRON, RUBBER SHOES/BOOTS.
Supplemental Safety and Health
NK

Chemical Properties

Boiling Pt:B.P. Text:310F,154C
Vapor Pres:4.4
Vapor Density:4.73
Spec Gravity:1.27
Evaporation Rate & Reference:0.15
Appearance and Odor:BLACK PASTE, ASPHALTIC ODOR
Percent Volatiles by Volume:28.0

Stability

Stability Indicator/Materials to Avoid:YES
MAY ATTACK SOME PLASTICS & RUBBERS.

Disposal

Waste Disposal Methods:INCINERATE, DISPOSE IN ACCORDANCE
W/LOCAL/STATE/FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.